Re: PRO-3 and a companion amp

[spinzone@spinzone.seanet.com (Philip Darden)]

>        No, my PRO-3 low end simulator output level is is comparable to the
>other modules I plug into my mixer.
>
>        Are you plugging the PRO-3 simulator directly into the SWR-400?
>If so,
>note that the SWR-400 has "high" and "low" input jacks where the "low" means
>that input signals plugged in there are attenuated to much lower levels than
>signals plugged into the "high" input.
>        You may need to use a cheap line mixer in the rack with your SWR
>to get
>full use of multi-keyboards.

Thanks Mark,
    The obvious is what usually blinds me :-). I've been running everything
through a mixer. I started really noticing it last saturday night, and just
tonight had the chance to check it closer. It looks like my mixer's the
culprit.

Philip Darden
spinzone@spinzone.seanet.com
SoundCtrl@aol.com
Sound Control Studio
Snohomish, Wa.