Re: 760 Leslie & chopped B3

[bnelson@glasscity.net (Bruce "Doc" Nelson)]

Everything should work just fine...the only thing I can think of that you'll
have to do is mount the 122's crossover...make sure it's seated nice and
tight.  The other thing is the impedance of the speakers...I don't have a
760 manual right in front of me, but I believe the speakers in a 760 are 4
ohm.  You could always totally swap everything out of the 122 (except the
motors) and then the impedances will be the same.
Bruce

>>Just wondering if it is a big job to swap the 760 guts with either 122 or 147
>>amp. You are right about the 760 bass response. It IS wonderful!
>>thanks,
>>darcy hepner
>>nelson, bc
>
>Also wondering if the speakers (driver + woofer) in the 760 are the same,
>or similar to the ones in a 122/147. Since the 122/147 amps are less
>powerful than 760's, are they able to "move" the speakers in a 760?
>
>Thanks in advance.
>
>Phil
>
>
>