Fwd: creating line out jack

[ScheffS@aol.com]

Yes i have an M-3 that i have recently done the modification you mention to.
 I took an ordinary metal light switch box that you are supposed to mount
into a wall and turned it upside down.  I out a togggle switch through one of
the punch outs on tha back of the box and a 1/4 inch female jack on the side
and mounted it inside next to the amp.  The whole thing costs about $5.00 and
what it does is if the switch is in one position the internal speaker is on
and so is the 1/4 out if you flip the switch the internal speaker is disabled
but the 1/4 out is not.  It is a very hot output as the signal is going
through the amp.  I run the signal to a custom amp (gold glitter!) and then
to mu modified Leslie 16 and it sounds great!
   Unfortunatly the organ is packed in the van outside and I can't accesss it
to tell you exactly which wire I ran to the switch.  Is your M-3 and older
model (with 3 wires to the speaker which has a coil on it) or a newer model
M-3 which as 2 wires and a permanent magnet? By sunday the organ will be off
the van and I can tell you more.

Steve

---------------------
Forwarded message: