L100 in pieces...

[L94_END@l.kth.se]

Last night me and my friend Rickard Enstroem got into the project 
"Put his old L100 back to work". It's been lying in pieces for a long 
time so our hopes were not high. Eventually we got sound out of it 
and it seemed to work fine. Drawbars, keys, internal speakers, reverb 
also worked good enough. BUT, we were not able to get the pedal (the 
volume adjusting foot device) to work! It just doesn't do anything, 
the volume is on the max all the time.

Since we're no hammond experts we now turn to y'all:
We have connected the cable from the preamp (at least it looks like a 
preamp) on the top going down to the pedal, and the cable going from 
the pedal to the bottom amp. (They were marked with colors so that 
even children can put'em back were they are supposed to be!) Then 
what? There are two other cables coming out of the pedal- device that
we don't know were they belong. Should they be connected to some sort 
of powersupply??? Does the pedal need powersupply???
The organ used to be equipped with a leslie-controller so there is a 
small box marked "Tremolobox, use with leslie 142....." Since the 
leslie is converted to be connected to other systems we thought that
this little box isn't needed, are we right?
Probably the two cables coming from the pedal have been connected to 
the Tremolobox, but we are not sure.

HELP!