Re: bass rotor belt on 860

[Steve Blair <sablair@pacbell.net>]

Jeff Conlin wrote:
> 
> Something bad happened, and I don't know how or why. Basically, the bass
> rotor belt (actually, string) appears to have stretched out so far that
> now there is too much slack between the motor and the rotor, and there
> isn't enough friction to turn the rotor.
> 
 Jeff-
If you've adjusted the motor position  as far as possible, try removing 
the cloth belt, wash it, then shrink it in the dryer.  That should 
tighten it up.  If not, you'll have to buy a new belt.

Steve in Berkeley